Dissolved Oxygen Saturation for Sewage Calculator

Dissolved Oxygen Saturation Formula:

\[ DS = \frac{N \times 9.17}{Ns \times Cf \times (1.024)^{(T-20)}} + DL \]

Oxygen Transferred (N):

kg/s/W

Oxygen Transfer Capacity (Ns):

kg/s/W

Correction Factor (Cf):

Temperature (T):

°C

Operation Dissolved Oxygen (DL):

kg/m³

Dissolved Oxygen Saturation (kg/m³):

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is Dissolved Oxygen Saturation for Sewage?

Definition: Dissolved Oxygen Saturation is the maximum amount of oxygen that can be dissolved in water at a given temperature and pressure.

Purpose: It's a crucial parameter in wastewater treatment to assess water quality and ensure sufficient oxygen for aquatic organisms.

2. How Does the Calculator Work?

The calculator uses the formula:

\[ DS = \frac{N \times 9.17}{Ns \times Cf \times (1.024)^{(T-20)}} + DL \]

Where:

\( DS \) — Dissolved Oxygen Saturation (kg/m³)
\( N \) — Oxygen Transferred (kg/s/W)
\( Ns \) — Oxygen Transfer Capacity (kg/s/W)
\( Cf \) — Correction Factor (typically 0.5)
\( T \) — Temperature (°C)
\( DL \) — Operation Dissolved Oxygen (kg/m³)

Explanation: The formula calculates the maximum oxygen that can be dissolved based on transfer rates, temperature, and current oxygen levels.

3. Importance of Dissolved Oxygen Calculation

Details: Proper oxygen levels are essential for aerobic biological processes in wastewater treatment and maintaining healthy aquatic ecosystems.

4. Using the Calculator

Tips: Enter all required parameters. Temperature should be in °C. The correction factor typically ranges from 0.5 to 1.0.

5. Frequently Asked Questions (FAQ)

Q1: Why is temperature important in this calculation?
A: Oxygen solubility decreases as temperature increases, so temperature significantly affects dissolved oxygen levels.

Q2: What's a typical correction factor value?
A: The default is 0.5, but it can range from 0.5 to 1.0 depending on system characteristics.

Q3: What are typical dissolved oxygen levels in wastewater?
A: Typically 1-3 mg/L (0.001-0.003 kg/m³) for aerobic treatment processes.

Q4: How does this relate to wastewater treatment efficiency?
A: Higher dissolved oxygen generally improves treatment efficiency up to a point, as it supports aerobic microorganisms.

Q5: What happens if dissolved oxygen is too low?
A: Low oxygen can lead to anaerobic conditions, odor problems, and poor treatment performance.