Depth Of Flow In Parshall Flume Given Discharge Coefficient 1.5 Calculator

Formula Used:

\[ \text{Depth of Flow in Parshall Flume} = \left( \frac{\text{Environmental Discharge}}{1.5} \right)^{\frac{1}{\text{Constant for a 6-inch Parshall flume}}} \]

Depth of Flow in Parshall Flume (Ha):

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is the Depth of Flow in Parshall Flume?

The Depth of Flow in Parshall Flume is the head measurement at the point upstream of the throat in a Parshall flume, which is used to determine the flow rate of liquids in open channels.

2. How Does the Calculator Work?

The calculator uses the formula:

\[ \text{Ha} = \left( \frac{\text{Qe}}{1.5} \right)^{\frac{1}{\text{np}}} \]

Where:

\( \text{Ha} \) — Depth of Flow in Parshall Flume (m)
\( \text{Qe} \) — Environmental Discharge (m³/s)
\( \text{np} \) — Constant for a 6-inch Parshall flume

Explanation: This formula calculates the depth of flow based on the environmental discharge and a specific constant for a 6-inch Parshall flume.

3. Importance of Depth Calculation

Details: Accurate depth calculation is crucial for proper flow measurement in open channels using Parshall flumes, which are widely used in water management and environmental monitoring.

4. Using the Calculator

Tips: Enter environmental discharge in m³/s and the constant for a 6-inch Parshall flume. All values must be valid positive numbers.

5. Frequently Asked Questions (FAQ)

Q1: What is a Parshall flume?
A: A Parshall flume is a fixed hydraulic structure used to measure flow in open channels, commonly used in irrigation, wastewater treatment, and environmental monitoring.

Q2: Why is the constant 1.5 used in the formula?
A: The constant 1.5 is the discharge coefficient specific to this calculation method for Parshall flumes.

Q3: What are typical values for the constant np?
A: For a 6-inch Parshall flume, the constant np typically ranges around 1.6, but may vary based on specific flume characteristics.

Q4: When should this calculation be used?
A: This calculation should be used when measuring flow in open channels using a 6-inch Parshall flume with the specified discharge coefficient.

Q5: Are there limitations to this equation?
A: This equation is specific to 6-inch Parshall flumes with the given discharge coefficient and may not be accurate for other flume sizes or configurations.