Kinematic Viscosity At 20 Degree Celsius For Standard Value Of Coefficient Of Permeability Calculator

Formula Used:

\[ v_s = \frac{K_t \times v_t}{K_s} \]

Coefficient of Permeability at any Temperature t:

m/s

Kinematic Viscosity at t° C:

m²/s

Standard Coefficient of Permeability at 20°C:

m/s

Kinematic Viscosity at 20° C:

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is Kinematic Viscosity at 20°C?

Kinematic Viscosity at 20°C is referred as a standard measure of a fluid's internal resistance to flow under gravitational forces at the standard temperature of 20°C. It is a crucial parameter in fluid dynamics and permeability studies.

2. How Does the Calculator Work?

The calculator uses the formula:

\[ v_s = \frac{K_t \times v_t}{K_s} \]

Where:

\( v_s \) — Kinematic Viscosity at 20° C (m²/s)
\( K_t \) — Coefficient of Permeability at any Temperature t (m/s)
\( v_t \) — Kinematic Viscosity at t° C (m²/s)
\( K_s \) — Standard Coefficient of Permeability at 20°C (m/s)

Explanation: This formula converts the permeability coefficient measured at any temperature to the standard kinematic viscosity value at 20°C.

3. Importance of Standard Coefficient of Permeability

Details: The Standard Coefficient of Permeability at 20°C serves as a reference value for comparing permeability measurements across different temperatures and conditions, ensuring consistency in fluid flow analysis.

4. Using the Calculator

Tips: Enter all values in the specified units. Ensure all input values are positive numbers. The calculator will provide the kinematic viscosity at the standard temperature of 20°C.

5. Frequently Asked Questions (FAQ)

Q1: Why is 20°C used as the standard temperature?
A: 20°C is widely accepted as a standard reference temperature in many scientific and engineering applications for consistency and comparability of measurements.

Q2: What factors affect kinematic viscosity?
A: Temperature is the primary factor - viscosity generally decreases with increasing temperature. Fluid composition and pressure also influence viscosity.

Q3: How accurate is this conversion formula?
A: The formula provides a reliable conversion when the permeability coefficients and viscosity values are accurately measured and the fluid behavior follows standard assumptions.

Q4: Can this calculator be used for all types of fluids?
A: While primarily designed for water and similar Newtonian fluids, the calculator can be used for other fluids if the appropriate permeability coefficients are provided.

Q5: What are typical units for these measurements?
A: Permeability is typically measured in m/s, while kinematic viscosity is measured in m²/s. Smaller units like cm/s or mm²/s may also be used depending on the application.