Home Back

Temperature Inside Solid Cylinder At Given Radius Immersed In Fluid Calculator

Temperature Solid Cylinder Formula:

\[ t = \frac{q_G}{4 \cdot k} \cdot (R_{cy}^2 - r^2) + T_{\infty} + \frac{q_G \cdot R_{cy}}{2 \cdot h_c} \]

W/m³
W/m·K
m
m
K
W/m²·K

Unit Converter ▲

Unit Converter ▼

From: To:

1. What is the Temperature Inside Solid Cylinder Formula?

The Temperature Inside Solid Cylinder formula calculates the temperature distribution within a solid cylinder with internal heat generation that is immersed in a fluid. It accounts for conduction through the solid material and convection at the fluid-solid interface.

2. How Does the Calculator Work?

The calculator uses the temperature formula:

\[ t = \frac{q_G}{4 \cdot k} \cdot (R_{cy}^2 - r^2) + T_{\infty} + \frac{q_G \cdot R_{cy}}{2 \cdot h_c} \]

Where:

Explanation: The formula combines the effects of internal heat generation, thermal conduction through the solid material, and convective heat transfer at the fluid boundary.

3. Importance of Temperature Calculation

Details: Accurate temperature calculation is crucial for thermal analysis of cylindrical components, predicting thermal stresses, designing cooling systems, and ensuring material integrity under thermal loads.

4. Using the Calculator

Tips: Enter all values in appropriate SI units. Internal heat generation, thermal conductivity, and convection coefficient must be positive values. Radius r must be between 0 and the cylinder radius Rcy.

5. Frequently Asked Questions (FAQ)

Q1: What is internal heat generation?
A: Internal heat generation refers to heat produced within the material itself, such as from electrical resistance, chemical reactions, or nuclear processes.

Q2: How does convection affect the temperature distribution?
A: Convection at the surface transfers heat between the solid and surrounding fluid, affecting the overall temperature profile within the cylinder.

Q3: What are typical values for thermal conductivity?
A: Thermal conductivity varies widely by material: metals (15-400 W/m·K), ceramics (1-30 W/m·K), polymers (0.1-0.5 W/m·K), and insulating materials (0.02-0.1 W/m·K).

Q4: When is this formula applicable?
A: This formula applies to steady-state conditions with uniform internal heat generation and constant thermal properties in a long cylinder.

Q5: What are the limitations of this approach?
A: The formula assumes constant properties, steady-state conditions, and may not account for radiation effects or complex boundary conditions.

Temperature Inside Solid Cylinder At Given Radius Immersed In Fluid Calculator© - All Rights Reserved 2025